Javascript required
Skip to content Skip to sidebar Skip to footer

Char Broil Big Easy Tru Infrared Manual

USER Manual

The Big Easy Oil-less Turkey Fryer

The Big Piece of cake
Oil-less Turkey Fryer

Tools needed for assembly:
Screwdriver (not provided)

If you have questions or need assistance during assembly, please phone call i-888-430-7870.

This instruction manual contains of import information necessary for the proper assembly and condom apply of the appliance.

Read and follow all warnings and instructions before assembling and using the appliance.

Follow all warnings and instructions when using the appliance.

PARTS DIAGRAM

PARTS DIAGRAM

Rubber Symbols

The symbols and boxes shown below explain what each heading means. Read and follow all of the messages found throughout the manual.

DANGER: Indicates an imminently chancy situation which, if non avoided, will result in death or serious injury.

WARNING: Indicates a potentially chancy state of affairs which, if non avoided, could result in death or serious injury.

Caution: Indicates a potentially hazardous situation or unsafe exercise which, if not avoided, may result in small or moderate injury.

DANGER

  1. Never operate this appliance unattended.
  2. Never operate this apparatus within 3ft (1m) of any structure, combustible material or other gas cylinder.
  3. Never operate this appliance within 25 ft (seven.five m) of whatever combustible liquid.
  4. If a fire should occur, continue away from the appliance and immediately call your fire section.

Failure to follow these instructions could upshot in fire, explosion or burn hazard, which could cause belongings impairment, personal injury or decease.

DANGER

If you smell gas:

  1. Shut off gas to the apparatus.
  2. Extinguish any open up flame.
  3. Open lid.
  4. If odour continues, keep away from the appliance and immediately call your burn department.

Failure to follow these instructions could result in  fire or explosion, which could cause property damage, personal injury or death.

WARNING

Exercise not effort to repair or alter the hose/valve/regulator for any "assumed" defect. Any modification to this assembly will void your warranty and create the run a risk of a gas leak and burn. Use only authorized replacement parts supplied by manufacturer.

CAUTION

For residential use only. Do not utilize for commercial cooking.

Installation Rubber Precautions

  • • Use your appliance, as purchased, only with LP (propane) gas and the regulator/valve assembly supplied.
  • The appliance installation must conform with local codes, or in their absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/ NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, and Propane Storage and Handling, CSA B149.two, Canadian Electric Code, CSA C22.one or the Standard for Recreational Vehicles, ANSI
    A 119.ii/NFPA 1192, and CSA Z240 RV Series, Recreational Vehicle Code, every bit applicable.
  • This appliance is not for utilize in or on recreational vehicles and/or boats.
  • This appliance is safety certified for use in the United States and/or Canada simply. Do non modify for utilise in whatsoever other location. Modification will result in a safe hazard.

WARNING

CALIFORNIA PROPOSITION 65

  1. Combustible by-products produced when using this product contains chemicals known to the State of California to cause cancer, nativity defects, or other reproductive harm.
  2. This product contains chemicals, including lead and lead compounds, known to the State of California to cause cancer, birth defects or other reproductive harm.

Launder your hands after handling this product

Caution

If grill should become out accidentally, turn the burner control O OFF, wait v minutes and repeat the lighting  procedure.

Grease Fires

  • Putting out grease fires by endmost the lid is not possible. Grills are well ventilated for safety reasons.
  • Do not use water on a grease fire. Personal injury may result. If a grease burn down develops, plough knobs and LP tank off.
  •  If grill has not been regularly cleaned, a grease fire can occur that may damage the product. Pay shut attention while preheating or burning off food rest to insure that a grease fire does not develop. Follow instructions on General Grill Cleaning and Cleaning The Burner Assembly to prevent grease fires.
  • The best way to preclude grease fires is regular cleaning of the grill.

Nutrient Safety

Nutrient safety is a very important office of enjoying the outdoor cooking feel. To go on nutrient safe from harmful bacteria, follow these four bones steps:
Make clean: Wash easily, utensils, and surfaces with hot soapy water earlier and after handling raw meat and poultry.
Dissever: Split raw meats and poultry from ready-to-eat foods to avert cross contamination. Use a clean platter and utensils when removing cooked foods.
Melt: Cook meat and poultry thoroughly to impale bacteria. Use a thermometer to ensure proper internal food temperatures.
Chill: Refrigerate prepared foods and leftovers promptly.

For more than data call: USDA Meat and Poultry Hotline at 1-800-535-4555 In Washington, DC (202) 720-3333, x:00 am- 4:00 pm EST.

Grease Tray

Never apply drippings straight from the grease tray to make gravy. Employ the included foil tray liner to catch drippings, and so reheat the drippings to impale bacteria. Replacement foil tray liners and other accessories can be establish at world wide web.charbroil.com.

How To Tell If Meat Is Cooked Thoroughly

  • Meat and poultry cooked in the apparatus often browns very fast on the exterior. Use just thawed meat and a meat thermometer to be certain food has reached a condom internal temperature, and cut into food to bank check for visual signs of doneness.
  • We recommend nutrient to be at to the lowest degree 40°F before cooking in your appliance.
  • Whole poultry should reach 165° F. Juices should run clear and flesh should not be pinkish.
  • Beef, veal and lamb steaks, roasts and pork chops can be cooked to 145° F.
  • NEVER partially cook meat or poultry and finish cooking afterwards. Cook food completely to destroy harmful bacteria.
  • Use a meat thermometer to ensure proper internal food temperatures.

DANGER

  • NEVER store a spare LP cylinder under or near the appliance or in an enclosed area.
  • Never fill a cylinder beyond 80% full.
  • An over filled or improperly stored cylinder is a hazard due to possible gas release from the safety relief valve. This could cause an intense fire with hazard of holding impairment, serious injury or death.
  • If yous run into, smell or hear gas escaping, immediately become abroad from the LP cylinder/appliance and call your fire department.
  • Go on LP tank at a minimum distance of 24" (inches) away from appliance at all times.

LP tank at a minimum distance

LP Cylinder Removal, Transport and Storage

  •  Plow OFF the control knob and LP cylinder valve. Turn coupling nut counterclockwise by hand only – do not apply tools to disconnect. Install safety cap onto LP cylinder valve. Ever use cap and strap supplied with valve. Failure to use condom cap every bit directed may result in serious personal injury and/or belongings impairment.

LP (Liquefied Petroleum Gas)

  • LP gas is nontoxic, odorless and colorless when produced. For Your Safety, LP gas has been given an odor (similar to rotten cabbage) and so that it can exist smelled.
  • LP gas is highly combustible and may ignite unexpectedly when mixed with air.
  • A disconnected LP cylinder in storage or being transported must accept a safety cap installed (every bit shown). Do not store an LP cylinder in enclosed spaces such as a carport, garage, porch, covered patio or other building. Never get out an LP cylinder inside a vehicle which may become overheated by the sun.
  • Do non store an LP cylinder in an area where children play.

LP Cylinder Valve

LP Cylinder

  • The LP cylinder used with your apparatus must meet the  post-obit requirements:
  • Utilize LP cylinders only with these required measurements: 12″ (30.5cm) (diameter) x 18″ (45.7 cm) (tall) with twenty lb. (9 kg.) capacity maximum.
  • LP cylinders must be constructed and marked in accordance with specifications for LP cylinders of the U.S. Department of Transportation (DOT) or the National Standard of Canada, Tin/CSA-339, Cylinders, Spheres and Tubes for  Transportation of Dangerous Goods; and commission, as applicable. Meet LP cylinder collar for marking.
  • LP cylinder valve must accept: OPD Hand Wheel
    Type 1 outlet uniform with regulator or appliance.
    Safety relief valve.
    UL listed Overfill Protection Device (OPD). This OPD prophylactic feature is identified past a unique triangular hand wheel. Apply just LP cylinders equipped with this type of valve.
  • LP cylinder must be bundled for vapor withdrawal and include collar to protect LP cylinder valve. Always keep LP cylinders in upright position during utilize, transit or storage.

LP Cylinder Filling

  • Apply only licensed and experienced dealers.
  • LP dealer must purge new cylinder before filling.
  • Dealer should NEVER fill LP cylinder more than 80% of LP cylinder volume. Volume of propane in cylinder volition vary past temperature.
  • A frosty regulator indicates gas overfill. Immediately close LP cylinder valve and call local LP gas dealer for assistance.
  • Do not release liquid propane (LP) gas into the atmosphere. This is a hazardous do.
  • To remove gas from LP cylinder, contact an LP dealer or call a local burn department for aid. Check the telephone directory nether "Gas Companies" for nearest certified LP dealers.

LP Cylinder Commutation

  • Many retailers that sell this appliance offer y'all the option of replacing your empty LP cylinder through an exchange service. Use but those reputable exchange companies that inspect, precision fill, exam and certify their cylinders. Exchange your cylinder only for an OPD safety characteristic-equipped cylinder  every bit described in the "LP Cylinder" department of this transmission.
  • Always keep new and exchanged LP cylinders in upright position during use, transit or storage.
  • Leak examination new and exchanged LP cylinders Before connecting to the appliance.

LP Cylinder Leak Test

For your rubber

  • Leak test must exist repeated each time LP cylinder is exchanged or refilled.
  • Do not fume during leak exam.
  • Practice not use an open flame to check for gas leaks.
  • This apparatus must exist leak tested outdoors in a well-ventilated expanse, away from ignition sources such as gas fired or electric appliances. During leak test, keep appliance away from open flames or sparks.
  • Use a make clean paintbrush and a 50/50 mild lather and water solution. Brush soapy solution onto areas indicated past arrows in figure beneath.
  • Exercise not use household cleaning agents. Damage to gas train components tin can consequence.

LP Cylinder Leak Test

Warning

If "growing" bubbles appear do not utilize or move the LP cylinder. Contact an LP gas supplier or your burn department!

Connecting Regulator to the LP Cylinder

  1. LP cylinder must be properly secured onto appliance. (Refer to assembly section.)
  2. Turn all control knobs to the OFF position.
  3. Plow LP cylinder OFF by turning hand-bike clockwise to a total stop.
  4. Remove the protective cap from LP cylinder valve. Ever utilize cap and strap supplied with valve.

Connecting Regulator

Do not utilise a POL transport plug (plastic function with external threads)! It will defeat the safety feature of the valve.

Do not use a POL transport plug

five. Concord regulator and insert nipple into LP cylinder valve. Paw-tighten the coupling nut, holding regulator in a straight line with LP cylinder valve and then equally not to cross-thread the connexion.

Hold regulator

Hold coupling

6. Turn the coupling nut clockwise and tighten to a total stop. The regulator will seal on the back-check characteristic in the LP cylinder valve, resulting in some resistance. An additional one-half to three-quarters turn is required to consummate the connection. Tighten by hand just – exercise not use tools.

Notation:
If you cannot complete the connection, disconnect regulator and repeat steps 5 and 6. If you are still unable to consummate the connexion, do not utilise this regulator!

DANGER
Practice not insert any tool or foreign object into the valve outlet or safe relief valve. You may damage the valve and cause a leak. Leaking propane may result in explosion, fire, astringent personal injury, or death.

Alarm

  • This appliance is not intended to be installed in or on a boat.
  •  This appliance is not intended to be installed in or on an RV.
  •  Never attempt to attach this appliance to the self contained LP gas system of a camper trailer or motor dwelling.
  •  Practise not apply this appliance until leak-tested.
  •  If a leak is detected at whatever time, Stop and call the burn department.
  •  If yous cannot stop a gas leak, immediately close LP cylinder valve and call LP gas supplier or your burn department!

Leak Testing Valves, Hose and Regulator

  1. Turn control knob to OFF.
  2. Exist sure regulator is tightly connected to LP cylinder.
  3. Completely open LP cylinder valve by turning hand wheel counterclockwise. If yous hear a rushing sound, turn gas off immediately. There is a major leak at the connection. Correct before proceeding.
  4. Brush soapy solution onto areas circled below.

Brush soapy solution onto areas circled

open LP cylinder valve

5. If "growing" bubbles appear, in that location is a leak. Close LP cylinder valve immediately and retighten connections. If leaks cannot be stopped do non endeavor to repair. Call for replacement parts. Guild new parts by giving the serial, model number and name and part number of items needed (see parts list) to the Grill Service Centre at the number listed on front end cover.
6. Always shut LP cylinder valve afterward performing leak test by turning paw wheel clockwise.

Warning

For Condom Employ of Your appliance and to Avert Serious Injury:

  • The use of alcohol, prescription or non-prescription drugs may impair the consumer's ability to properly assemble or safely operate the appliance.
  •  When cooking, the appliance must be on a level, stable noncombustible surface in an surface area clear of combustible material. An cobblestone surface (blacktop) may not be adequate for this purpose.
  • Practise non leave appliance unattended. Keep children and pets away from the apparatus at all times.
  • Do not place empty cooking vessel on the appliance while in operation. Use caution when placing anything in cooking vessel while the appliance is in operation.
  • Do not move the apparatus when in employ. Allow the cooking vessel to cool to 115°F (45°C) earlier moving or storing.
  • This appliance is non intended for and should never exist used every bit a heater.
  • This appliance will be hot during and after use. Use insulated oven mitts or gloves and long-handled barbecue utensils for protection from hot surfaces or splatter from cooking liquids.
  • Continue appliance expanse clear and free from materials that burn.
  • Continue apparatus expanse clear and free from combustible materials, gasoline and other flammable vapors and liquids.
  • Keep fuel supply hose away from any heated surfaces.
  • Use appliance merely in well-ventilated space. NEVER use in enclosed infinite such as carport, garage, porch, covered patio, or nether an overhead structure of any kind.
  • Use apparatus at to the lowest degree 3 ft. from whatever wall or surface. Maintain ten ft. clearance to objects that tin can take hold of fire or sources of ignition such as pilot lights on water heaters, live electrical appliances, etc.

Use appliance

Ignitor Lighting

• Do not lean over appliance while lighting.

  1. Plow ON LP gas cylinder.
  2. Printing and turn the control knob to
  3.  Plow ROTARY IGNITOR knob rapidly.
  4.  If ignition does not occur in five seconds, turn the burner control knob O OFF, look 5 minutes, and repeat lighting procedure.

If ignition withal does not occur, follow match-lighting instructions.

WARNING
Turn control knob and LP cylinder OFF when not in utilize.

Circumspection
If ignition does Not occur in 5 seconds, turn the command knob OFF, expect 5 minutes and repeat the lighting process. If the burner does not ignite with the valve open up, gas volition keep to menstruum out of the burner and could accidently ignite with risk of injury.

Lucifer-Lighting
Do non lean over appliance while lighting.

  1. Turn ON LP cylinder.
  2. Swing lucifer pigsty plate to betrayal match lighting hole. Place lit match into match lighting hole of appliance every bit pictured below. Make sure lit match is placed within hole and near burner.
  3. Button in and turn control knob to Be sure burner lights and stays lit.
  4. Once lit, swing friction match hole plate back to cover upwardly match lighting hole. Caution: Plate peradventure hot.
Match-Lighting
View is from side of appliance

Burner Flame Cheque

  • Lite burner. Looking through viewing hole on top of appliance, you should see the flame height as shown beneath. Turn control knob from to OFF. The Flame meridian should decrease and then go out. Always cheque flame prior to each use. If simply depression flame is seen refer to "Sudden drop or depression flame" in the Troubleshooting Section.

Burner Flame Check

Ignitor Check
• Plow gas off at LP cylinder. Plough ignitor knob. "Click" should be heard each time at electrode. See "Troubleshooting" if no click or spark.

Valve Cheque
Important: Brand certain gas is off at LP cylinder earlier checking valve. Knob locks in OFF position. To cheque valve, starting time push in knob and release, knob should jump back. If knob does non spring back, replace valve assembly earlier using this appliance. Turn knob to position then turn back to OFF position. Valve should turn smoothly.

Hose Check
• Earlier each employ, bank check to run into if hose is cut, worn or kinked. Supervene upon damaged hose before using appliance. Use merely valve/hose/regulator specified past manufacturer.

Hose Check

General Apparatus Cleaning

  • Meat Thermometer: Do not immerse or soak in water. Wash with warm soapy water and wipe dry.
  • Do not error brown or blackness accumulatiodue north of grease and smoke for paint. Interiors are not painted at the factory (and should never exist painted). Utilise a stiff solution of detergent and water or utilise a grill cleaner with scrub brush on insides of appliance lid and bottom. Rinse and allow to completely air dry out. Exercise not apply a caustic grill/oven cleaner to painted surfaces. A black surface improves the appliances functioning.
  • Plastic parts: Wash with warm soapy h2o and wipe dry. Practise not use citrisol, abrasive cleaners, degreasers or a full-bodied grill cleaner on plastic parts. Damage to and failure of parts can issue.
  • Painted surfaces: Wash with mild detergent or non-abrasive cleaner and warm soapy water. Wipe dry with a soft nonabrasive textile.
  •  Stainless steel surfaces: To maintain the loftier quality advent, launder with balmy detergent and warm soapy water and wipe dry with a soft cloth after each use. Broiled-on grease deposits may require the use of an abrasive plastic cleaning pad. Use only in management of brushed finish to avert damage. Do not utilize abrasive pad on areas with graphics.

Circumspection

SPIDER ALERT

If your appliance is getting difficult to calorie-free or the flame is weak, check and clean the venturi's and burners.

Spiders or small insects are know to create "flashback" bug by building nests and laying eggs in the appliance venturi or burner obstructing the flow of gas. The dorsum-up gas can ignite backside the command panel. This flashback can damage your appliance and cause injury. To prevent flashbacks and ensure skillful performance the burner and venturi tube assembly should be removed and  cleaned when ever the appliance has been idle for an extended catamenia of time.

7. Clean inner burner as recommended below, shown East. We suggest iii ways to clean the burner tube. Utilise the one easiest for yous.
(A) Curve a stiff wire (a light weight coat hanger works well) into a minor claw. Run hook through burner tube several times.

Cleaning the Burner Assembly

(B) Use a narrow bottle brush with a flexible handle (do non use a brass wire brush), run the castor through burner tube several times.
(C) Habiliment eye protection: Utilize an air hose to force air into the burner tube and out the burner ports. Check each port to brand certain air comes out each pigsty.
8. Check burner for damage, due to normal vesture and corrosion some holes may become enlarged. If any large cracks or holes are found replace burner.
9. Attach electrode to burner.
10. Advisedly supersede command panel assembly .
VERY IMPORTANT: Burner tube must re-appoint over valve opening. See analogy, shown F.
11. Reposition inner liner, cooking basket and superlative cover.

Cleaning the Burner Assembly

LIMITED WARRANTY

This warranty only applies to units purchased from an authorized retailer. Manufacturer warrants to the original consumer-purchaser only that this production shall be free from defects in workmanship and materials after correct assembly and nether normal and reasonable home use for the periods indicated below start on the appointment of purchase*. The manufacturer reserves the right to crave that lacking parts exist returned, postage and or freight pre-paid by the consumer for review and test.

LIMITED WARRANTY

*Note: A dated sales receipt Will be required for warranty service.

The original consumer-purchaser volition exist responsible for all shipping charges for parts replaced under the terms of this limited warranty.

This express warranty is applicable in the The states and Canada only, is only available to the original owner of the product and is not transferable.

Manufacturer requires proof of your appointment of purchase. Therefore, you should retain your sales slip or invoice. Registering your production is not a substitute for proof of purchase and the manufacturer is not responsible for or required to retain proof of purchase records.

This express warranty applies to the functionality of the product ONLY and does not cover cosmetic bug such equally scratches, dents, corrosions or  discoloring by rut, abrasive and chemical cleaners or any tools used in the assembly or installation of the apparatus, surface rust, or the discoloration of stainless steel surfaces.

This express warranty will not reimburse you for the cost of whatsoever inconvenience, food, personal injury or property damage.

ITEMS MANUFACTURER Volition Not PAY FOR:

  1. Shipping cost, standard or expedited, for warranty and replacement parts
  2. Service calls to your home.
  3. Repairs when your product is used for other than normal, single-family household or residential use. acts of God, improper installation or maintenance, installation not in accordance with electric or plumbing codes, or apply of products not approved by the manufacturer.
  4. Damage, failures, or operating difficulties resulting from accident, alteration, devil-may-care handling, misuse, abuse, burn down, flood acts of God, improper installation or maintenance, installation non in accord with electrical or plumbing codes, or employ
    of products not approved past the manufacturer.
  5. Any food loss due to product failures or operating difficulties.
  6. Replacement parts or repair labor costs for units operated outside the United States or Canada.
  7. Pickup and commitment of your product.
  8. Repairs to parts or systems resulting from unauthorized modifications fabricated to the product.
  9. The removal and/or reinstallation of your product.

DISCLAIMER OF Implied WARRANTIES and LIMITATION OF REMEDIES

Repair or replacement of defective parts is your sectional remedy under the terms of this limited warranty. In the event of parts availability issues, the manufacturer reserves the right to substitute like or similar parts that are every bit functional.

Manufacturer will not be responsible for any consequential or incidental damages arising from the breach of either this limited warranty or whatever applicative unsaid warranty, or for failure or impairment resulting from acts of God, improper care and maintenance, grease burn, accident, alteration, replacement of parts by anyone other than Manufacturer, misuse, transportation, commercial employ, abuse, hostile environments (inclement conditions, acts of nature, animal tampering), improper installation or installation not in accordance with local codes or printed manufacturer instructions.

THIS Limited WARRANTY IS THE SOLE Limited WARRANTY GIVEN By THE MANUFACTURER. NO PRODUCT Performance SPECIFICATION OR Clarification WHEREVER APPEARING IS WARRANTED BY MANUFACTURER EXCEPT TO THE EXTENT Gear up Forth IN THIS Express WARRANTY. Whatever IMPLIED WARRANTY PROTECTION ARISING UNDER THE LAWS OF ANY State, INCLUDING IMPLIED WARRANTY OF MERCHANTABILITY OR Fitness FOR A PARTICULAR PURPOSE OR USE, IS HEREBY Express IN DURATION TO THE DURATION OF THIS Limited WARRANTY.

Neither dealers nor the retail establishment selling this product has any potency to make any boosted warranties or to hope remedies in addition to or inconsistent with those stated above. Manufacturer's maximum liability, in whatsoever event, shall non exceed the purchase price of the product paid by the original consumer.

NOTE: Some states practise non let an exclusion or limitation of incidental or consequential amercement, so some of the to a higher place limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights as set forth herein. You may also have other rights which vary from state to state. In the state of California only, if refinishing or replacement of the product is not commercially practicable, the retailer selling this product or the Manufacturer will refund the purchase price paid for the production, less the amount directly attributable to use past the original consumer-purchaser prior to discovery of the nonconformity. In add-on, in the state of California just, y'all may have the product to the retail establishment selling this product in guild to obtain performance nether this limited warranty.

If y'all wish to obtain operation of any obligation under this limited warranty, y'all should
write to:
Consumer Relations
P. O. Box 1240
Columbus, GA 31902-1240

Consumer returns will non be accepted unless a valid Return Authority is starting time acquired. Authorized returns are clearly marked on the outside of the package with an RA number and the package is shipped freight/postage pre-paid. Consumer returns that do not meet these standards volition exist refused.

ASSEMBLY

ASSEMBLY

ASSEMBLY

ASSEMBLY

ASSEMBLY

NOTE: Before cooking on your appliance for the first time, refer to the Outdoor Cooking Guide on how to fix the apparatus for cooking. Information technology is recommended that you flavor your appliance prior to cooking.

wind conditions

  • When cooking hang top cover on handle as shown.
  • Once seasoning is complete, the appliance is now ready for utilise. The cooking pot will continue to darken with use. This will inhibit rusting along with improving the operation of the infrared cooking pot.
  • Use of mesh height cover is optional. Heat will reflect off of the meridian cover and provide boosted browning to the height of your meat. Exist conscientious – the superlative cover can cause the oestrus to reflect too much, so as to fire the top of your meat. The top cover helps when cooking in temperatures below 40˚F or in loftier-wind weather.

wind conditions

EMERGENCIES

If a gas leak cannot be stopped, or a burn down occurs due to gas leakage, call the fire section.

EMERGENCIES

Troubleshooting

Troubleshooting

Read More Nearly this Manual….

Char-Bake-The-Big-Easy-Oil-less-Turkey-Fryer-Manual-Optimized

Char-Broil-The-Big-Easy-Oil-less-Turkey-Fryer-Manual-Original

Model 08101480 [pdf manual]: 130812-eight

Questions about your Manual? Post in the comments!

borchgrevinkhtiquous.blogspot.com

Source: https://manuals.plus/char-broil/char-broil-the-big-easy-oil-less-turkey-fryer-instruction-manual